Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 22 Next »

INITIAL CONSIDERATIONS: 

Your device must be connected to either the UofU Network or VPN into the UofU Network to work with protected data. Use Global Protect VPN to connect to the UofU Network from off-campus locations. There are a few steps for the initial setup, however once initial configuration is complete you will simply click ‘connect’ to access the VPN.

PROCEDURE:

Please follow the steps below to connect to UofU Network via VPN:

  1. Download Global Protect VPN to your device: https://apps.apple.com/us/app/globalprotect/id1400555706 , https://docs.paloaltonetworks.com/compatibility-matrix/globalprotect/where-can-i-install-the-globalprotect-app

  2. Start client and input portal address ‘vpn.utah.edu’ > click ‘save’

    1. If needed, you may access the portal address via Global Protect settings.

      1. Open Global Protect > click 3-lined action bar > click ‘settings’ > click small (+) plus icon at the bottom of the pop-up window to add a VPN address

3. Click connect

4. After clicking connect, a pop-up browser will appear, login to U of U page using your unid & campus wide password

4. Confirm Duo authentification

5. Global Protect confirms you are ‘Connected’ to the VPN

6. If you are unable to connected after following the steps above or receive an error, restart your device and click ‘connect’ once more

  • No labels