Versions Compared

Old Version 4

changes.mady.by.user Alyssa Hill

Saved on

compared with

New Version 5

changes.mady.by.user Alyssa Hill

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

The BMIC team supports the following Printer Setup(s):

Supported Case

Explanation

Printer details needed to support

Label Printing Failure

 

The printer has already been configured for project/lab, but labels are failing to print. If you are experiencing print issues, follow the below steps:

  1. Reboot printer (turn power to printer off)

  2. Wait a few minutes

  3. Turn printer power back on

    1. If labels do not begin to generate after taking the steps above, submit a printer support ticket providing the below information in your ‘description’ box.

Printer details needed to support:

  • Protocol Short Title being printed

  • Lab group

    • (ie, OBGYN, Pediatrics, Pulmonary)

  • Date & Time print failure occured

    • (be as specific as possible)

New Machine Setup

(or)

Printer Relocation

A printer needs configured for the first time

(or)

A previously setup printer is being move to a new IP address, which requires new machine setup.

NOTE:

Note
Panel
panelIconIdatlassian-warning
panelIcon:warning:
bgColor#FFEBE6

If your printer machine has already been configured, but is being move to a new location/room this does not require BMIC support so long as your department IT contact confirms the printer will stay on the same network with the same IP address.

Printer details needed to support:

  • Model Number

  • IP Address

  • Maximum DPI

Printer Add to

existing

Existing workflow

A printer & label configuration has already been completed, but now needs configured for an additional printerPrinter details needed to support:

  • Model Number

  • IP Address

  • Maximum DPI

  • Protocol to be printed

How to submit a help ticket for printer support:

...